B.2. Use of plate sealer (only for lter plate use)
To apply vacuum evenly on each lter plate
cavity, we recommend placing a plate-sealer
lm on top of unused lter plate cavities.
To apply vacuum evenly on each cartridge,
we recommend placing sealing caps in
each of the unused slots of the cartridge
adapter.
When using cartridges as
lter consumables during
an automated run with the
Andrew+ robot, OneLab
prompts the usage of a
Collection Labware Rack Domino
in addition to the collection
rack itself.
Ordering info: Adhesive Seal for 96-well
and 384-well Plates, 100/pk, Waters p/n:
186006336C
Contact your Waters representative.
Ordering info: Microplate Gripper (Tool),
Waters p/n: 186009776
Contact your Waters representative.
This Domino holds the collection consumables
during the rst phases of the solid-phase
extraction, such as: conditioning, loading, and
washing.
The Collection Labware Rack Domino is included
in each Extraction+ Cartridge Kit. You can also
purchase it separately.
Sample available in the packaging
B.4. Collection labware rack (only for cartridge use)
B.3. Use of sealing caps (only for cartridge use)
B.5. Labware gripper (only for Andrew+ use)
Cut o the desired dimensions and
apply the lm on the plate over the
unused cavities
Add the Microplate Gripper
tool on the Andrew+
robot tool rack to ensure
automated movement of
collection labware and racks
into and out of the manifold.
To Next Page
Loading...
