EasyManua.ls Logo

Watlow ez-zone pm - Page 65

Watlow ez-zone pm
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Watlow EZ-ZONE
®
PM Integrated Controller 62 Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter name
Description
Range Default
Parameter
Appears
in Menu
When
Modbus Rela-
tive
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
[`iP;9]
[ ip.9]
Linearization (1 to 2)
Input Point 9
Set the value that
will be mapped to
output 9.
-1,999.000 to 9,999.000 8.0 Always Instance 1
Map 1 Map 2
- - - - 3590
Instance 2
Map 1 Map 2
- - - - 3660
0x86 (134)
1 to 2
0x10 (16)
173 float
RWES
[`oP;9]
[ op.9]
Linearization (1 to 2)
Output Point 9
Set the value that
will be mapped to
input 9.
-1,999.000 to 9,999.000 8.0 Always Instance 1
Map 1 Map 2
- - - - 3610
Instance 2
Map 1 Map 2
- - - - 3680
0x86 (134)
1 to 2
0x1A (26)
174 float
RWES
[iP;10]
[ip.10]
Linearization (1 to 2)
Input Point 10
Set the value that
will be mapped to
output 10.
-1,999.000 to 9,999.000 9.0 Always Instance 1
Map 1 Map 2
- - - - 3592
Instance 2
Map 1 Map 2
- - - - 3662
0x86 (134)
1 to 2
0x11 (17)
175 float
RWES
[oP;10]
[op.10]
Linearization (1 to 2)
Output Point 10
Set the value that
will be mapped to
input 10.
-1,999.000 to 9,999.000 9.0 Always Instance 1
Map 1 Map 2
- - - - 3612
Instance 2
Map 1 Map 2
- - - - 3682
0x86 (134)
1 to 2
0x1B (27)
176 float
RWES
[``Pu]*
[`Set]
Process Value
[``Fn]
[ Fn]
Process Value (1 to 2)
Function
Set the function that
will be applied to the
source or sources.
Note:
Differential and
Ratio not available
using instance 2.
[`oFF] Off (62)
[usla] Vaisala RH Compen-
sation (1648)
[`W;b] Wet Bulb/Dry Bulb
(1369)
[`S;bA] Sensor Backup (1201)
[rAti] Ratio (1374)
[diFF] Differential (1373)
[root] Square Root (1380)
[`alt] **Pressure to Alti-
tude (1649)
Off Always if
part num-
ber digit 4
is C, R, J, B,
E or N.
PM4, 8 and
9 only
Instance 1
Map 1 Map 2
- - - - 3320
Instance 2
Map 1 Map 2
- - - - 3390
0x7E (126)
1 to 2
0x15 (21)
123 uint
RWES
[p;unt]
[P.unt]
Process Value (1 to 2)
Pressure Units
Set the units that
will be applied to the
source.
[`psi] Pounds per Square
Inch (1671)
[pasc] Pascal (1674)
[atm] Atmosphere (1675)
[mbr] Millibar (1672)
[torr] Torr (1673)
PSI Always Instance 1
Map 1 Map 2
- - - - 3334
Instance 2
Map 1 Map 2
- - - - 3404
0x7E (126)
1 to 2
0x1C (28)
- - - - uint
RWES
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with other
interfaces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E:
EE-
PROM
S:
User
Set
** Pressure Altitude calculation is based on the International Standard Atmosphere 1976

Table of Contents

Other manuals for Watlow ez-zone pm

Related product manuals