Form: AZ2-ModularCable-TSDRSC-1B.doc Page 1 of 1
Description
The EBC-XXXF E-BUS Cables are
used to connect power and
communications between the AZ 2
Controller, EM1, EM2 and EM3
Expansion Modules. They are also
used to connect E-BUS style sensors
to the AZ 2 Controller and expansion
modules and GPC-XP Controller.
The E-BUS Cables are plenum-rated
high flex wire cables with an EBC
Connector on each end of the cable.
The E-BUS Cables are labeled with
“WATTMASTER E-BUS” marking
every foot.
The EBC E-BUS Cables are available
in 1, 1.5, 3, 10, 15, 25, 50, 75, 100,
and 150 foot lengths. These lengths
should satisfy most job requirements.
For length requirements other than
those listed, the MS000248 E-BUS
Adapter Hub can be used to connect
EBC E-BUS Cables together to
provide for your specific-length
requirements.
The plug-in design of the E-BUS
Cables eliminates costly wiring errors
and makes system installation easy.
The cable components are all UL
approved.
EBC-XXXF E-BUS
Digital Sensor Cable Assembly
EBC-
XX
F
"WATTMASTER EBUS" "WATTMASTER EBUS"
EBC- F
432 1
3M
432 1
3M
Length
in Feet
CABLE SIDE
VIEW
EBC-XXF
E-BUS CABLE
XX
Technical Data EBC-XXXF E-BUS Cables
EBC E-BUS Ca-
ble Available
Lengths and Part
Numbers
EBC-1 F (1 Foot)
EBC-1.5 F (1.5 Foot)
EBC-3 F (3 Foot)
EBC-25 F (25 Foot)
EBC-50 F (50 Foot)
EBC-75 F (75 Foot)
EBC-100 F (100 Foot)
EBC-150 F (150 Foot)
Current Rating
of Cable Wire
300 Vrms Min = 10.15 Ohms per 1000 feet @
20 Deg Celsius, Nominal
Cable Type Plenum-rated High Flex Wire Wire Colors Red/Black First Pair; White/Blue Second Pair
Wire Size 19 Strands of 32 Gage Wire, 4
Conductor
UL Listing No. CMP/CL3P/FPLP
Terminations Cable – 2 EBC Connectors Cable Sheath
Color
White, Plenum Rated CL3P/CMP
with “WATTMASTER EBUS”
marking every foot.
Three Year Warranty
WattMaster reserves the right to change specifications without notice
To Next Page
Loading...