22
EN
12. Technical characteristics
This thermostat can be used in conditions described below:
11. Maintenance
Cleaning of the thermostat
Gently dust the outside of the thermostat
with a soft, lint-free cloth.
If the thermostat needs a more thorough
cleaning:
- Lightly dampen a soft and clean cloth
with water.
- Wring out any excess water from the cloth.
- Gently wipe the display and sides of the
thermostat, making sure no drops of water
accumulate around the product.
Important: Do not spray thermostat direct-
ly with water, or use cleaning solutions or
polishes, as doing so may damage the
thermostat.
IP IP20
ERP Class IV (2%)
Ambient operating temperature 0°C to 50°C (32°F to 122°F)
Storing temperature -20°C to 60°C (-4°F to 140°F)
Power Supply 24AC to 230VAC
Internal humidity sensor In option
Temperature sensor Internal
and/or external (optional)
NTC 10kΩ at 25°C
Regulation type
Proportional band (cycles 15-30-45-60 min)
or hysteresis 0.2°C to 3.0°C
Temperature ranges
Comfort / Reduced / Anti-freeze 5 to 35°C /
5 to 35°C / 0.5 to 10°C / (increments of 0.5°C)
Power output Live Triac, NO or NC
24VAC: Max. 5 actuators (1,6W/actuator)
230VAC: Max. 8 actuators (1,8W/actuator)
To Next Page
Loading...
