Watts Vision Wired WT-D03 User Manual

6
EN
4.1 LCD logo description
1. Icon showing current operating mode
of thermostat with left to right:
Thermostat is in master configuration
when logo mode is with frame .
Thermostat is in slave configuration
when logo is without the frame .
Boost/timer mode
Comfort mode in heating mode
Reduced / ECO mode
Frost protection mode
Off mode when “reversible” mode is
activated
2. Open window funct ion
3. Displaying of reduced clock and heat-
ing & cooling order:
- order is applied to heating system
- order of reduced set point mode
- order of cooling configuration
- order of stop
1
2 3 5
6
7
8
9
10
4
4. Product description
4. Measured temperature/tempera-
ture set point/remaining time for boost
mode
5. Locked keyboard:
6. Parameter menu number:
7. Parameter menu:
8. Indication of heating & cooling
demand
9. Type of measured data & sensor used
for system regulation:
- Humidity measurement & control
- External temperture sensor
- Internal temperature sensor
- Ambient temperature sensor
- Floor temperature sensor
10. Temperature units or or
measurement of humidity rate
Minus button or
down/left button for
menu navigation.
Plus button or up/
right button for
menu navigation.
Validation of temperature set point setting or accessing
to parameter menu or displaying measured
temperature/ temperature set point.

Watts Vision Wired WT-D03 Specifications

General

Brand	Watts
Model	Vision Wired WT-D03
Category	Thermostat
Language	English