Waves Scheps Omni Channel User Manual

Scheps Omni Channel / User Guide
10
Linking Controls
In the Collapsed view, there is one control per function (e.g., frequency, gain, SC listen, thump), whether the signal
is mono or stereo. Both channels of a stereo signal are controlled together, and by default, with the same values.
Left and right, or mid and side, are always linked in the Collapsed view.
Use the Stereo Linking button in the Expanded view to
decouple left and right controls so that you can adjust
the sides separately.
When you relink variable controls, such as knobs and
faders, their offsets will be maintained.
When Stereo Linking is on, switches are linked, clicking
a left or right switch will set both controls to the same
value (e.g., EQ type, filter on/off, SC on/off, and
dynamics processing mode).
In Stereo or Duo stereo modes, the left and right control
sections are labeled L and R.
In the M/S mode, the labels will change to M and S, for
mid and side

Waves Scheps Omni Channel Specifications

General

Brand	Waves
Model	Scheps Omni Channel
Category	Recording Equipment
Language	English