Waves Scheps Omni Channel User Manual

Scheps Omni Channel / User Guide
32
DS
2
Module
The DS
2
module works much like a de-esser: when sound at a specified frequency surpasses a threshold, gain is
reduced by a defined amount. DS
2
differs from a de-esser in that any frequency can serve as the side band that
triggers the compressor. It can, of course, be used as a standard de-esser. There are two identical DS
2
sections, so
that low-frequency and high-frequency sounds can be addressed simultaneously.
Filter type select
Selects shape of filter for sidechain detection.
Range: low shelf, bell, narrow cut, high shelf
Frequency
Sets the roll-off start point for a high-pass filter or the center frequency for the band-pass filter.
Range: 20 Hz to 20 kHz
Threshold
Sets the processor’s engagement level.
The processor’s threshold uses adaptive sensing to provide more natural results.
Range: -48 dB to 0 dB
Sidechain l
isten
Click to audition the sidechain filter.
Range: off or on
Hold Ctrl while moving the Frequency control vertically to audition the side band and sweep through
frequencies. This helps locate accurate frequency settings.
DS
2
module output level adjust
Range -12 dB to +12 dB
Gain reduction meter
Indicates gain reduction imposed by the compressor.
Range: -12 dB to -3 dB (four steps)
Sidechain control access
Click on the SC button to access the DS
2
Expanded view for sidechain control.
DS
2
Expanded View

Waves Scheps Omni Channel Specifications

General

Brand	Waves
Model	Scheps Omni Channel
Category	Recording Equipment
Language	English