Waves Scheps Omni Channel User Manual

Scheps Omni Channel / User Guide
33
The DS
2
Expanded v
iew consists of four identical sections (two sections in the mono component) that are used to
control frequency and threshold independently for the left and right or mid and side channels in both DS
2
sections,
and to set the filter types used for sidechain detection.
The External Sidechain button at the top of the window enables and
disables external sidechain for the entire DS
2
module. All sections share
the same sidechain.
Independent DS
2
module engage/bypass switches.
Independent Sidechain Filter select for the left and right channels of
both DS
2
sections.
Filter type
Range: low shelf, notch, bell, high shelf
Independent Sidechain Listen buttons
Select sidechain listen for the left and right channels of both processors.
The section’s signal is band limited to enable you to focus on a specific
side band. Main outs are muted and only sidechain is heard.
Frequency sweep
To precisely locate a sidechain frequency, hold Ctrl and drag vertically on a frequency control. This activates sidechain listen and
lets you sweep across frequencies.

Waves Scheps Omni Channel Specifications

General

Brand	Waves
Model	Scheps Omni Channel
Category	Recording Equipment
Language	English