Scheps Omni Channel / User Guide
Using the Compressor module in the M/S mode
Compressing in M/S can be harder to conceptualize than some of the other processes. But you can use it in very
creative ways, especially when you have a source like a loop that has multiple elements to it. With M/S compression
you can really focus on one set of elements in the Mid and the rest on the Sides. For instance, use a slow attack
VCA compressor in the middle to add attack to the kick and snare in a loop, while quickening up the attack and
slowing down the release on the sides to even out and add sustain to percussion and cymbals.