Waves Scheps Omni Channel User Manual

Scheps Omni Channel / User Guide
38
Output mix ratio
Determines the wet/dry ratio of the compressor module output
Range: 0% to 100%
Compressor output level
Trims the output level of the compressor module
Range: -12 dB to +12 dB
Compressor sidechain adjust
Clic
k on the SC button in the Collapsed view to open the Expanded view for sidechain adjustment.
Sidechain filters
There are identical sidechain filter sections for left and right channels (mid and side in the M/S stereo mode). Use the Link button to
decouple left and right channels. Hold Ctrl and drag vertically over the Frequency control to easily isolate a desired frequency.
Sidechain listen
Solos sidechain signal
only. Click to lock. Hold Ctrl and drag to sweep across
side band frequencies.
Range: off or on
Low-shelf filter
Filter active: (off or on)
Gain (range -18 dB to +18 dB)
Frequency (range: 20 Hz to 20 kHz)
Bell filter
Filter active: (off or on)
Gain (range -18 dB to +18 dB)
Frequency (range: 20 Hz to 20 kHz)
High pass filter
Filter active (off or on)
Frequency (range: 20 Hz to 20 kHz)

Waves Scheps Omni Channel Specifications

General

Brand	Waves
Model	Scheps Omni Channel
Category	Recording Equipment
Language	English