For the purpose of this manual: the product designated on the front cover will be defined herein after as the “Product;” and Dover Fuel-
ing Solutions (“DFS”), will reference different entities based on the point of origin for which the product is manufactured. For Products
from North America, DFS references Wayne Fueling Systems LLC located in Austin, Texas. For Products from Brazil, DFS references
Wayne Industria e Comercio Ltda. located in Rio de Janeiro, Brazil. For Products from the United Kingdom, DFS references Dover
Fueling Solutions UK Ltd. located in Dundee, Scotland. For Products from China, DFS references Tokheim Hengshan Technologies
Company, Ltd. located in Guangzhou, China. For Products from India, DFS references Dover Fueling Solutions India Private Limited.
Safety Precautions
Before beginning work, block off the work area with safety cones. ALWAYS make sure that ALL power to the dispenser
is turned OFF before opening the cabinet or starting work. Physically lock, restrict access to, and/or tag the circuit
breakers that you turn off. In addition, be sure to trip (close) all emergency valves under the dispenser (if installed)
BEFORE you begin.
Make sure that you locate the facility’s emergency shut-off button, and know how to turn OFF power to the dispenser
and submersible pumps (if any) in an emergency. Never allow a leaking pump to run! Use appropriate measures to
clean up any fuel on the forecourt, and ensure that any leaks or issues that could cause a leak are attended to and
repaired immediately.
Instructions within this manual may call for the removal and disposal of parts. Whenever removing or discarding any
part, those parts should be properly disposed of or recycled according to Federal, State, and Local regulations.DFS
always recommends that parts not under disposal regulations be recycled whenever possible.
Trouble with the installation of this product should be referred to your DFS ASO. An ASO with a technician number can
receive assistance by calling Dover Technical Support (DTS) at:
1-800-926-3737
Customers, Installers or Distributors, who are not an ASO, needing help with the operation or installation of this prod-
uct, should contact Dover Technical Support (DTS) at:
1-800-289-2963 OR support.austin@doverfs.com
For assistance with the DFS DX
™
connected solutions platform, including DX Wetstock
™
, DX Monitor
™
, DX Promote
™
,
DX Retail
™
or DX Fleet
™
, contact DFS DX Global Support at:
1-844-991-3030 OR dfsdxsupport@doverfs.com
Indicators and Notations
NOTE! Indicates extra information or a tip.
IMPORTANT! Highlights an element of a procedure to ensure accuracy, completeness, and performance.
READ THIS MANUAL BEFORE STARTING ANY WORK!
Fuel dispensers contain both electrical components and a hazardous,
flammable and potentially explosive fuel.
Failure to follow the below precautions and the Warning and Caution
instructions in this manual may result in serious injury.
IT IS YOUR RESPONSIBILITY to follow all rules, codes, regulations, and
laws that apply to your location and the type of work being performed.
Highlights an essential element of a pro-
cedure to ensure accuracy, complete-
ness, and appropriate performance.
Indicates a potentially hazardous situation,
which if not avoided, may result in personal
(non-lethal) injury or equipment damage.
Indicates a potentially hazardous
situation, which if not avoided, MAY
result in death or serious injury.
INDICATES A HAZARDOUS SITUATION,
WHICH IF NOT AVOIDED, WILL RESULT
IN DEATH OR SERIOUS INJURY.
To Next Page
Loading...
