56
II. Handling the battery
1. Reading the level of charge on the battery
To find out your charge level, press the charge button located on the top of your battery once.
The 4 LEDs light up to indicate the level of charge.
DISPLAY CHARGE LEVEL
● ● ● ● 100%
● ● ● ◌ 75%
● ● ◌ ◌ 50%
● ◌ ◌ ◌ < 25%
2. Inserting / removing the battery
The battery on the power-assisted bicycles is placed on the diagonal tube, it is directly connected to
the control box.
WARNING: Before handling the battery, make sure the switch is in the off position.
To install the battery, first slide the battery pack along the rail diagonally and press to make sure it is
securely in place and lock.
To Next Page
Loading...
