10 Packing, Storage and Shipping
1001
10 Packing, Storage and Shipping
10.1 General information
If the heater or its components are sent to Webasto for test-
ing or repair, it must be cleaned and packed in such a way
that it is protected against damage during handling, trans-
port and storage.
IMPORTANT
If an entire heater is returned, then it must be completely
drained. It must be ensured that no fuel or coolant can es-
cape during packing and/or shipping.
The coolant inlet and outlet connections and the fuel lines
must be sealed off with blind plugs.
The ambient temperatures indicated in section 4 must not be
exceeded for storage.
Visit www.butlertechnik.com for more technical information and downloads.
To Next Page
Loading...
