20
Ford Focus / Focus C-MAX / Focus CC
Preparing coolant connection
WARNING!
Install hoses so that they are kink-free. Unless specified otherwise, always fasten using cable ties.
Position spring clips so that no other hose can be damaged!
The connection should be "inline" based on the following diagram:
Coolant
routing
diagram
Heat
exchanger
Motor
Ø 20x18
Ø 25
A
B
C
D
All clamps without a specific designation = 27 mm dia. spring clips!
All connecting pipes without a specific designation are dia. 20x20!
To Next Page
Loading...
