Webasto Ford Focus - Final Work

Ford Focus / Focus C-MAX / Focus CC
Webasto AG
Postfach 80 - 82132 Stockdorf, Germany - Hotline +49-
(0)1805-932278
Final Work
WARNING!
Reassemble the disassembled components in reverse order.
Check all hoses, hose, spring and Caillau clamps, as well as all electrical connections for firm seating.
Secure all loose cables using cable ties.
Only use manufacturer-approved coolant.
Spray the heater unit components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect battery
- Bleed and fill the coolant circuit according to the vehicle manufacturer’s specifications.
- Set the digital timer.
- Adjust the vehicle heater with automatic air-conditioning or without automatic air-conditioning
according to "Operating Instructions for End Customer".
- Check the proper operation of the additional heater, see the operating instructions/installation
instructions.
- Attach the "Switch off additional heater before refueling" sticker to the left-hand B-pillar.
i
Printed in Germany 05/08Printed by: Steffen