Webasto MultiControl - Page 48

48

Turn the control knob in order to choose
the desired ”Day/Night” symbol.

Press the control knob in order to confirm
selection.
“Off” option is preset.
Day/Night
Settings

Turn the control knob in order to set the value
for the start of the day, the end of the day, bright-
ness during a day, brightness at night.
Preset time for a day is shown in the display.

Press the control knob in order to confirm
selection.
“An hour” for the start of the day flickers in the
display.
Day/Night
Settings

Turn the control knob in order to choose the
desired start of the day “an hour”.

Press the control knob in order to confirm
selection.
Time of “a minute” for the start of the day
flickers in the display.
Start of
daytime
Settings