Weber Summit Series Service Manual

9
8
7
GRill aSSemblY ReinStallatiOn
ReaR Vent inStallatiOn
ReaR Vent bRacket inStallatiOn
TOOLS NEEDED: - PHILLIPS
TOOLS NEEDED: - PHILLIPS
A) Push grill assembly into island structure.
B) Align each front caster so that v-shaped piece faces forward. Reach behind
each caster and push lock down. (Not Pictured)
A) Place rear vent onto frame assembly (1).
B) Using a Phillips head screwdriver, install screws that secure rear vent to
rear vent bracket (2).
A) Place rear vent bracket onto frame assembly hooks (1).
B) Using a Phillips head screwdriver, install screws that secure rear vent
bracket to frame assembly (2).
• REPLACEMENT PART INSTALLATION
10
ReinStallatiOn OF
FROnt WHeel aliGnment panel
TOOLS NEEDED: - PHILLIPS
A) Make sure v-shaped piece of each caster is facing outward away from
island structure (1).
B) Place front wheel alignment panel onto grill assembly (2).
C) Using a Phillips head screwdriver, install screws that secure front wheel
alignment panel to grill assembly (3).
1
2
1
2
1
2 3

Weber Summit Series Specifications

General

Brand	Weber
Model	Summit Series
Category	Grill
Language	English