EasyManuals Logo

Weber Summit Series User Manual

Weber Summit Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
DANGER
When the “excess gas fl ow control” feature is
activated, a small amount of gas is still fl owing to the
burners. After turning OFF the cylinder and burner
control knobs, wait at least 5 minutes for the gas to
clear before attempting to light the barbecue. Failure to
do so may result in an explosive fl ame-up, which can
cause serious bodily injury or death.
OPERATING INSTRUCTIONS
1
4,5,7
6
3
2
2
TO EXTINGUISH
Push down and turn each burner control knob clockwise to OFF position.
Turn gas supply OFF at the source.
*The grill illustrated may have slight differences than the
model purchased.
3) Turn the cylinder on by turning the cylinder valve counterclockwise.
4) Put match in the match holder and strike match.
WARNING: Do not lean over open barbecue.
5) Push LEFT burner control knob down and turn to START/HI.
6) Insert match holder and lit match down through cooking grates and
Flavorizor
®
bars to ignite LEFT burner in each selected burner set.
WARNING: If the burner does not light, turn the LEFT
burner control knob to OFF and wait 5 minutes to let
the gas clear before you try again.
7) After LEFT burner is lit you can turn on the RIGHT burner adjacent to it.
The RIGHT burner lights from the LEFT burner.
MAIN BURNER LIGHTING

Other manuals for Weber Summit Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Weber Summit Series and is the answer not in the manual?

Weber Summit Series Specifications

General IconGeneral
BrandWeber
ModelSummit Series
CategoryGrill
LanguageEnglish

Related product manuals