WEG CFW-10 EASYDRIVE - Fault Messages; Other Messages

11
CFW-10 - QUICK PARAMETER REFERENCE
Display Description Page
E00 Output Overcurrent/Short-Circuit 78
E01 DC Link Overvoltage 78
E02 DC Link Undervoltage 78
E04 Inverter Overtemperature 79
E05 Output Overload (Ixt Function) 79
E06 External Fault 79
E08 CPU Error (Watchdog) 79
E09 Program Memory Error (Checksum) 79
E24 Programming Error 79
E31 Keypad (HMI) Communication Fault 79
E41 Self-Diagnosis Error 79
II. Fault Messages
III. Other Messages
Display Description
rdy Inverter is ready to be enabled
Sub
Power supply voltage is too low for the inverter
operation (undervoltage)
dcb Inverter in DC braking mode
EPP Inverter is loading factory setting