Technical Specifications
CFW-11M G2 | 8-5
8
8. 2 .1 Codes and Standards
Safety Standards
UL 508C - Power conversion equipment
UL 840 - Insulation coordination including clearances and creepage distances for electrical equipment
EN61800-5-1 - Safety requirements electrical, thermal and energy
EN 50178 - Electronic equipment for use in power installations
EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General requirements
Note: In order to have a machine in accordance with this standard, the manufacturer of the machine is responsible for
installing an emergency stop device and a device for disconnection from the power line
EN 60146 (IEC 146) - Semiconductor converters
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating
specifications for low voltage adjustable frequency AC power drive systems
Electromagnetic
Compatibility
Standards (EMC)
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard including
specific test methods
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of industrial, scientific
and medical (ISM) radio-frequency equipment
CISPR 11 - Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance
characteristics - Limits and methods of measurement
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section
2: Electrostatic discharge immunity test
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section
3: Radiated, radio-frequency, electromagnetic field immunity test
N 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section
4: Electrical fast transient/burst immunity test
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section
5: Surge immunity test
EN 61000-4-6 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section
6: Immunity to conducted disturbances, induced by radio-frequency fields
Mechanical
Construction
Standards
EN 60529 - Degrees of protection provided by enclosures (IP code)
UL 50 - Enclosures for electrical equipment
To Next Page
Loading...
Need help?
General
