Safety Instructions
CFW-11M G2 | 1-1
1
1 SAFETY INSTRUCTIONS
This manual contains the necessary information for the correct use of the CFW-11M G2 frequency inverter.
Only trained and qualified personnel should attempt to install, start-up, and troubleshoot this type of equipment.
1.1 SAFETY NOTICES IN THE MANUAL
The following safety warnings are used in this manual:
DANGER!
The procedures recommended in this warning have the purpose of protecting the user against dead,
serious injuries and considerable material damage.
DANGER!
Les procédures concernées par cet avertissement sont destinées à protéger l'utilisateur contre des
dangers mortels, des blessures et des détériorations matérielles importantes.
ATTENTION!
The procedures recommended in this warning have the purpose of avoiding material damage.
NOTE!
The text intents to supply important information for the correct understanding and good operation
of the product.
1.2 SAFETY WARNINGS ON THE PRODUCT
The following symbols are attacheds to the product as safety warnings:
High voltages present.
Components sensitive to electrostatic discharges. Do not touch them.
Mandatory connection to the protection earth (PE).
Connection of the shield to the ground.
Hot surface.
To Next Page
Loading...
Need help?
General
