WEG WECM-AL80-85A2 User Manual

Installation, Operation and
Maintenance Manual
WECM / Emerald eZA

WEG WECM-AL80-85A2 Specifications

General

Brand	WEG
Model	WECM-AL80-85A2
Category	DC Drives
Language	English

Summary

1. GENERAL INFORMATION

1.1. WARNINGS IN THIS MANUAL

Explains the purpose of DANGER, ATTENTION, and NOTE warnings in the manual.

2. SAFETY MEASURES

Outlines safety precautions for personnel and equipment handling.

3. SHIPMENT, STORAGE AND HANDLING

4. IDENTIFICATION LABELS

Describes the nameplate and drive label with product information.

5.1. POWER CONNECTIONS

5.2. CONTROL CONNECTIONS

Instructions for making control connections according to nameplate.

5.3. EMC REQUIREMENTS FOR CONFORMING INSTALLATIONS

6. OPERATION INSTRUCTIONS

Provides instructions and warnings for operating the motor safely and correctly.

6.1. SELECTING THE ROTATION DIRECTION

6.2. HOW TO ADJUST SPEED

Details methods for adjusting motor speed using local controls or remote signals.

6.3. CONTROL OUTPUT REFERENCE

6.4. HOW TO ADJUST THE MAXIMUM AND MINIMUM SPEED VALUE

Explains how to set the maximum and minimum operating speed for the motor.

6.5. EXTERNAL SPEED CONTROLLER (OPTIONAL)

6.6. FIRE MODE FUNCTION (OPTIONAL)

6.7. PASSIVE POWER FACTOR CORRECTION (PFC) (OPTIONAL)

7. PRODUCT PROTECTIONS AND FAULT DIAGNOSIS

7.1. INFORMATION FOR CONTACTING TECHNICAL SUPPORT

8. MAINTENANCE

9. ENVIRONMENTAL INFORMATION

Information regarding disposal at end of life cycle.

10. ADDITIONAL INFORMATION

Information for shipment, storage, handling, installation, operation and maintenance.

10.1. WARRANTY TERM

11. TECHNICAL SPECIFICATIONS

Covers general technical specifications for the product.

11.1. POWER SUPPLY

Details rated voltage, tolerance, frequency, phase imbalance, and power cycle interval.

11.2. STANDARDS AND DIRECTIVES

UK Declaration of Conformity

EU Declaration of Conformity