上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Specialized, Concentrated, Focused - 55 -
USB flash disk. Input ―back‖, and then press ―Enter‖ to enter backup selection environment. Selecting ―2‖
will enter into backup state automatically. If there is already the image file ―diskback.gho‖ in the USB
flash disk, remember to rename it or cut it before one-key backup. Otherwise, the tool kit will exit from
backup environment automatically if the image file has already existed in the USB flash disk.
Note:
If abnormal conditions occur during system restore and backup, the most possible causes are as
following:
1) The boot sequence of BIOS hard disk is wrong.
2) The OS has already been broken before backup.
3) The USB space is not enough.
4) The image file has already existed in the USB in the process of backup.
5) Sometimes, if backup or restore exits abnormally, it is possible that there are bad sectors in the
system CF card. The way to solve it is to repair the hard disk of CF card.
6) On account of the above issues, it is suggested to check and repair the system disk before OS
restore and backup, or system performance may be affected, so is the data disk.
To Next Page
Loading...
Need help?
General
