WEIHONG Lambda 5S Series - User Manual

Lambda Series CNC System
Manufacturers’ Manual
3rd Edition
Weihong Electronic Technology Co., Ltd.
(For PM85A/95A, NC65A/65B)

WEIHONG Lambda 5S Series Specifications

General

Control axes	5
Linkage axes	5
Power supply	24V DC
Protection Level	IP20
Input Voltage	24V DC
Operating Temperature	0°C - 45°C
Storage Temperature	-20°C - 60°C
Humidity	10% - 90% (non-condensing)

Summary

Revision History and Precautions

CAUTION and WARNING Statements

General and critical safety information requiring special attention.

Precautions for Handling and Installation

Precautions for Operation and Use

System Overview and Configuration

NC65 A;65 B Host Introduction

Details the NC65A/65B integrated CNC system and its features.

Communication Card Details

Describes PM85A/95A communication cards and their applications.

Lambda Controller Series

Details Lambda 3S/3L and 4S/5S series controllers and their capabilities.

System Running Status and Configuration

Overall Wiring Diagram

Provides a general overview of the system's wiring connections.

Wiring and Interface Details

Lambda 3 S;3 L Series Controller Wiring

Details wiring and IO definitions for the Lambda 3S/3L controller.

Lambda 4 S;5 S Series Controller Wiring

Driver Interface and Signal Types

System Installation and Setup

Communication Card Installation and Setup

Covers installation, driver update, and customization for PM85A/95A communication cards.

NC65 A;65 B Host Installation and OS Management

Machine Tool Debugging Procedures

Machine Tool Debugging Steps

Outlines the step-by-step process for machine tool debugging.

Pulse Test for Drivers