WEIHONG Lambda 5S Series User Manual

上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 50 - Specialized, Concentrated, Focused
Fig. 3-11 Software setup progress
4) After setup completed, the system installs the driver automatically. See Fig. 3-12.
Fig. 3-12 Driver installation
5) After driver installation completed, the following dialog appears. At this time, clicking ―OK‖ will reboot
the system. After reboot completed, NcStudio will be opened automatically.
Fig. 3-13 Driver installation completed
3.2.2 OS Backup and Restore
The OS can be backed up and restored in NC65A/65B, and the concrete steps are as following.
3.2.2.1 First-time OS Backup
1) Press F7 repeatedly at boot until entering the interface shown in Fig. 3-14.

WEIHONG Lambda 5S Series Specifications

General

Brand	WEIHONG
Model	Lambda 5S Series
Category	Controller
Language	English