Specialized Concentrated Focused
References「59」
Time interval between two adjacent lubes
Duration time to release lubrication oil each time
Parameters Related with Algorithm
Whether to adopt S-type algorithm
Whether to adopt arc increment mode
In arc increment mode, the coordinates of the circle
centre are relative to the starting point. Otherwise,
they are relative to workpiece origin.
Used to set the max. look-ahead segments when
calculating connection speed
Parameters Related with Compensation
Whether to enable backlash compensation
The backlash compensation amount of X, Y and Z
to
Generally, the spindle is secured to a screw whose outer wire and inner wire on the outer wire cannot
be completely matched, backlash compensation compensates the clearance between the screw of
last direction that the spindle needs to finish after reversing its moving direction.
Other Operations
The larger the value is, the smoother the workpiece
surface will be, but tool large value will affect the
dimension of workpiece. 0.01 is recommended for a
mold machine, and 0.03 for a woodworking machine.
Whether to enable 100% feedrate override for G00
Calculated with respect to workpiece origin. The
horizontal movement at this height is considered to be
safe, used in breakpoint resume and backing to
workpiece origin.
The thickness of the tool presetter.
To Next Page
Loading...
