To Next Page

To Previous Page

Merrychef eikon

e2s service and repair manual

_______________________________________________________________________________________________________________________________

4 Accessing the easyTouch

screen

Back to contents >

4.3 Cleaning procedures

Cool down the oven

Clean the cold oven

PLACE A

TRAY OF ICE

IN THE OVEN

28¡C

50¡C

CLEAN

CAVITY

1. Press the hand icon from

the main menu (full serve

mode) or the blue

thermometer icon (quick

serve mode).

2. Place a pan of ice into the

oven to speed up the cool

down process. Press the

green tick.

3. Leave the door open

slightly. Wait for

temperature to reduce to

50°C or 122°F. This takes

approximately 20 mins.

4. Once the cooling process is

complete you will see a ‘clean

cavity’ screen. Remove the

pan of water. The oven is

now ready for cleaning.

Do not leave the pan of

water in the oven overnight.

Pan and water may be hot.

Use heat proof gloves.

Wear PPE

Cleaner

1. Remove the cook

plate and any other

cooking accessories

from the cavity.

2. Wash all parts in

warm soapy water using

a sponge. Rinse off and

dry using a clean cloth.

Remove any spillages

with a suitable cloth or

paper towel.

3. Use a dry clean

brush to remove any

food particles from

between the cavity

floor and the inside of

the front door.

4. Spray Merrychef

approved cleaner onto

a sponge and wipe

onto the sides of the

inside of the oven, the

back, the base and the

oven door. Avoid the

roof and door seal

5. For difficult areas, leave

to soak for 10 minutes

with the oven door open.

Clean the cavity using a

non-abrasive sponge.

Again, avoid the roof and

do not scrub the door seal.

Do not spray directly into the

cavity. Avoid the roof and door

seal.

IMPORTANT

Cool down the oven before

cleaning.

You will need

PPE:

§ heat proof gloves

§ protective rubber

gloves

§ eye protection

Cleaning materials:

§ non-abrasive nylon scrub pad

§ cleaning cloths

§ Merrychef oven cleaner (or

Merrychef approved cleaning

chemicals)

§ Merrychef oven protector

CLEAN

CAVITY

Protec to r

APPLY OVEN

PROTECTOR

REMOVE, CLEAN, &

REPLACE FILTER

SHUTTING

DOWN...

6. Remove the

Merrychef cleaner with

a clean wet cloth. The

cavity roof and door

seal can also be gently

wiped if necessary, to

remove food debris.

Dry the oven with a

clean dry cloth. Press

the tick on the ‘clean

cavity’ screen to

continue.

7. Apply oven protector

(optional). Spray

Merrychef Protector

onto a sponge and

spread lightly onto the

sides of the inside of the

oven, the back, the base

and the oven door and

heat oven afterwards.

8. Replace the cook

plate and press the

green tick to continue.

9. Remove the air filter

and wipe it clean or

wash in soapy water.

Dry and replace and

then press the green

tick to continue.

10. Switch the oven off.

Wipe the outside of the

oven with a clean

sanitised cloth.

Avoid the roof and door seal.

Heat oven to cure the

protective chemical.

WARNING: Do not use the oven without a clean

filter in place. Do not use caustic cleaners in the

oven cavity as they cause permanent damage

to the catalytic converters. Do not use tools,

sharp implements or harsh abrasives on any

part of the oven.

Brand	Welbilt
Model	MERRYCHEF eikon e2s
Category	Microwave Oven
Language	English

Welbilt MERRYCHEF eikon e2s Service & Repair Manual

Table of Contents

Other manuals for Welbilt MERRYCHEF eikon e2s

Questions and Answers:

Welbilt MERRYCHEF eikon e2s Specifications

Related product manuals