Welbilt MERRYCHEF eikon e2s - Page 63

_______________________________________________________________________________________________________________________________
8 cooking procedures
Back to contents >
Merrychef eikon
®
e2s Installation and User Manual
63
_______________________________________________________________________________________________________________________________
Temperature band
1.
Select the 'Temp Band' symbol.
2.
Select the required temperature band checkbox, shown by a green
tick.
Generally, the lowest practical ‘Temp Band’ should be chosen.
If the set cavity temperature falls by more than the selected ‘Temp
Band’ value, the ready to cook mode and the ‘Temp Band’ are
deactivated until the cavity reaches the pre-set preheat temperature.
3.
When finished, select backspace to return to the main settings menu.
Change password
1.
Select the 'key' symbol to change the passwords of the appliance.
The default ‘MANAGER’ and ‘SERVICE’ passwords can be changed to
customer specific passwords of your choice.
2.
Select the appliance 'settings' or 'service' symbol, dependant on the
password you which to change.
3.
Enter the existing password and press the green tick to confirm.
4.
Then enter a new password and press the green tick.
5.
Confirm the new password and press the green tick again.
6.
When finished, select backspace to return to the main settings menu.