Printing Interpretive Messages (Switch #2)
No messages Depress the ON portion of the switch to select this
option. This causes messages which interpret the
tympanogram to not be included on the printout.
Refer to Description of Formats on page 16 for
more information on these messages.
Messages Depress the OFF portion of the switch to select this
option. This causes the messages which interpret the
tympanograms to be included on the printout.
Printing Tympanogram Only or Tympanogram and Data (Switch #3)
Tympanogram Depress the ON portion of the switch to select this
Only option. Only the tympanogram and the GR (Width)
numeric value will print.
Tympanogram Depress the OFF portion of the switch to select this
and Data option. Both the tympanogram and its corresponding
numeric data will print.
Manufacturing Switch (Switch #4)
This switch is used during manufacturing only. Leave
this switch in the OFF position. The Printer/Charger
will not operate normally if this switch is on.
22
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1234
OFF
To Next Page
Loading...
