Welch Allyn Spot Vision Screener VS100 - Screening Subjects; Pre-Screening Preparation; Performing a Screening; Subject Data and Results

Setting up the vision screener
Contents Checklist
The main shipping box contains the vision screener, Directions for use, and the
Accessory box.
The Accessory box contains:
• AC Power Cord
• Power Supply/Charger
• Cleaning Cloth
• Cable Straps
Note Please do not discard the box and foam. Damages incurred by shipping the
device in non-approved packing material voids the limited warranty. (See
Warranty for details.)
To charge the vision screener
Charge the vision screener for 4 hours before first use. When the battery reaches a very
low level, the screen displays a notice to insert the power cable. If the power cable is not
inserted, the device automatically shuts down.
1.
Connect the power cord to the power supply.
2. Locate the power connector on the vision screener and connect the power supply.
13