Welch Allyn Spot Vision Screener VS100 - Subject Information Screen; To Screen a Subject

Subject Information screen
You can use the Subject Information screen to enter or verify the subject's data. Date of
Birth (or Age) is the only required field.This field displays with a red background if the
date of birth (or age) is blank or invalid, or if the subject's age is under 6 months or over
100 years.
Field Description
Subject ID
Consists of a maximum of 30 characters, letters and numbers.
First name
Consists of a maximum of 20 characters, letters only.
Last Name
Consists of a maximum of 20 characters, letters only.
Date of
Birth
(Required)
Enter a date of birth in the specified format (MMDDYYYY or DDMMYYYY) or enter the age and touch
Months or Years.
Eyewear
prescription
Allows you to select None, or Glasses, or Contacts. If this field is left blank, None is
selected.
Gender Allows you to select Male or Female. If this field is left blank, no gender is specified.
OK
Confirms any changes.
Go
Begins the screening.
To screen a subject
If the vision screener has a location specified, the name of the location is displayed on
the top left of the screen in parentheses. If there is no location specified, and you want a
location included in the screening information, on the Home screen touch Tools, and
then touch Location to specify the screening location.
Completed exams are saved automatically.
1.
Turn on the vision screener.
The Home screen appears.
2. Stand approximately 3 feet (1 meter) from the subject with one foot ahead of the
other for stability.
3. Hold the vision screener on an even plane with the subject's eyes.
18 Screening subjects Welch Allyn® Spot™ Vision Screener Model VS100