.
2 © Weldclass 2020 | E.&O.E.
Congratulations & thank you for choosing Weldclass!
The Weldforce range from Weldclass provides market leading value, features and durability.
Register Your Warranty Now
To qualify for an extended warranty, you must register within 30 days of purchase.
Full details on warranty period and terms can be found at www.weldclass.com.au/WarrantyInfo
Please register your warranty now by going to:
www.weldclass.com.au/weldforcewarranty
You will need;
a) A copy of your purchase invoice / receipt.
b) Your machine serial number which can be found on the technical data plate on the back of the
machine, or on the outside of the box that your machine came in.
Satisfaction Guarantee
For full details on our satisfaction guarantee, refer to www.weldclass.com.au/mbg
IMPORTANT !
If using TIG Torch with Remote (Amperage) Control:
Remote Adaptor MUST be connected to TIG Torch at all times to protect
machine from HF interference damage. Refer to section 7.2 of this manual
for further information.
To Next Page
Loading...
