i16 Manual Page 30 - Revision: 2-09-2023
How to Assemble the Water Tray
Push the water tray onto the unit until you hear a “click” sound.
*This machine has an audible “beep” indicator when the water or ice is dispensed. To turn
off the “beep” sound, simultaneously press and hold for 5 seconds both the HOT WATER
and AMBIENT WATER select buttons until all LED indicators flash 5 times. To enable the
“beep,” repeat the same process.
Stand Fastening
1. Remove the Drip Tray of unit and the Front Cover of
Stand.
2. After placing the unit on the Stand, place your hand
behind the Stand to secure the M6 hex bolts (x4).
*After tightening, ensure it is stable and there is no
danger of tipping or falling.
3. Once fixed, return the Drip Tray of unit and the Front
Cover of Stand.
To Next Page
Loading...