Why is there no water coming from my Wellsys Water System?
The Wellsys Water System may not be dispensing water because the water supply is turned off or has a slow flow. Ensure the water feed is active and provides adequate flow.
What to do if my Wellsys Water System has no water due to the leak stop?
If water accumulates at the bottom of your Wellsys Water System, the leak stop feature will automatically shut off the water supply. Check for any leaks and ensure the system is dry.
What to do if my Wellsys Water System has low water pressure?
If the water pressure to your Wellsys Water System is below 60psi: * The system might not produce water fast enough. * The bladder tank may not fill sufficiently. Consider switching from an RO setup to a filtered setup or resolve any issues with the RO system.
Explains the warning symbols used in the manual for hazard identification.
Lists essential safety measures for operating and maintaining the i16 unit.
Highlights the key advantages and functionalities of the Wellsys i16 Water Treatment System.
Details the standards and certifications that the i16 system complies with.
Provides model information and general technical specifications for the unit.
Outlines the dimensions and weight of the unit for shipping purposes.
Describes the user interface and control elements of the i16 system.
Step-by-step guide on how to operate the i16 Water Treatment System.
Outlines prerequisites and precautions for servicing the i16 Water Treatment System.
Lists all available replacement parts for the i16 model with part numbers.
Illustrates the path of water flow through the i16 system components.
Provides a detailed schematic of the Printed Circuit Board for technical reference.
Details the steps and materials needed before commencing the installation process.
Provides important considerations and location guidelines for proper unit installation.
Step-by-step instructions for installing the i16 Water Treatment System.
Instructions for cleaning and sanitizing the cold and sparkling water circuits.
Details on draining, disassembling, descaling, and rinsing the ice bin.
Procedure for removing mineral scale from the ice tank.
Procedure for rinsing the system after descaling or sanitizing operations.
Instructions for cleaning the unit's water reservoir tank.
Instructions for reassembling the unit after cleaning or maintenance.
Checks to ensure the unit is functioning correctly after cleaning procedures.
Guidelines for proper disposal and regular tank cleaning schedule.
Procedure for manually resetting the hot tank overload thermostat.
Lists common issues and directs users to relevant solutions for the i16 system.
General| Model | i16 |
|---|---|
| Category | Water System |
| Filtration Method | Reverse Osmosis |
| Power Consumption (Heating) | 500W |
| Hot Water Temperature | 90-95°C |
| Filter Life | 6 months |
| Installation | Countertop |
| Warranty | 1 year |
| Cold Water Temperature | 5-10°C |
| Weight | 25 kg |
To Next Page