Wen 3939 User Manual

9
UNPACKING & PACKING LIST
UNPACKING
With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the band saw from the
packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard
the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and
accessories. If any part is missing or broken, please contact customer service at 1-800-232-1195 (M-F 8-5 CST),
or email techsupport@wenproducts.com.
1
2
3
4
5
6
7
8
1. Band Saw ...............................................................1
2. Fence .....................................................................1
3. Table Assembly ......................................................1
4. Open Spanner ........................................................1
5. 6mm Hex Wrench ..................................................1
6. 4mm Hex Wrench ..................................................1
7. Miter Gauge ...........................................................1
8. Feet ........................................................................4
ASSEMBLY & ADJUSTMENT TOOLS
The tools listed below are not included but are required for either assembly or adjustment:
• 13mm Open-End Wrenches (2)
• Phillips-Head Screwdriver (1)
• Combination Square (1)

Wen 3939 Specifications

General

Brand	Wen
Model	3939
Category	Saw
Language	English