3
INTRODUCTION
Thanks for purchasing the WEN Miter Saw. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-847-429-9263.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
SPECIFICATIONS
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations
with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the
risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not
substitutes for proper accident prevention measures.
Model Number MM1215
Motor 120V, 60 Hz, 15A
No-Load Speed 5000 RPM
Blade Model Number BL1280
Blade Size 12 Inches
Arbor Size 1 Inch (25.4mm)
Kerf & Teeth 2.4mm, 80T
Miter Table Angles 0º - 50º Left and Right
Bevel Cut Angles 0º - 45º Left and Right
Positive Miter Stops 0, 15, 22.5, 31.6, and 45, Left and Right
Cutting Capacity
0° Miter, 0° Bevel 13.25 in. x 4.5 in.
45° Miter, 0° Bevel 9.25 in. x 4.5 in.
0° Miter, 45° Bevel 13.25 in. x 3.125 in.
45° Miter, 45° Bevel 9.25 in. x 3.125 in.
Dust Port Diameter Outer Diameter: 2.5 in. Inner Diameter: 2.25 in.
Weight 46.7 Pounds
Product Dimensions 29.1 in. x 26.9 in. x 14.4 in.
To Next Page
Loading...
Need help?
General
