Westerbeke 6.5KW - Page 88

Distributor Disassembly
1.
Remove
wires from distributor noting their position
for
replace-
ment.
2.
Remove
distr ibutor
from engine.
3.
Remove
cap.
4.
Remove rotor.
5.
Remove governor
assembly.
6.
Remove pickup coil and
igniter.
Distributor Assembly
1. Assemble in the reverse order of disassembly.
2. Apply engine oil sparingly to the o-ring on the distributor shaft.
3. Insert the distr ibutor shaft by turning it, ensur ing that the
distributor shaft fits into the groove on the rear of the camshaft
which is offset to provide proper timing.
4. Adjust engine timing according to the specifications in the Engine
Technical Data Section.
82