WHARTON 4850 - Network Setting Menu Operations; Configuring IP, Subnet Mask, and Gateway

Issue 2.0
4850 / 4860 Master Clock
Operating and Installation Instructions
9-4
Network setting menu
Normal time display
Function ‘Time Setting Mode’. Press ‘+’ three
times to move to Network setting mode.
Function ‘Network Setting Mode’. Press
‘^’ to select.
Network Setting Mode, with IP address
1st byte flashing.
Use ‘+’ and ‘-’ to change setting.
Network Setting Mode, with IP address
2nd byte flashing.
Use ‘+’ and ‘-’ to change setting.
Network Setting Mode, with IP address
3rd byte flashing.
Use ‘+’ and ‘-’ to change setting.
Network Setting Mode, with IP address
4th byte flashing.
Use ‘+’ and ‘-’ to change setting.
Network Setting Mode, with Subnet
mask 1st byte flashing.
Use ‘+’ and ‘-’ to change setting.
Network Setting Mode, with Subnet
mask 2nd byte flashing.
Use ‘+’ and ‘-’ to change setting.
Network Setting Mode, with Subnet
mask 3rd byte flashing.
Use ‘+’ and ‘-’ to change setting.