www.whiskersuppo.com
22
Cat Presence
The Lier-Robot is equipped with a
Motion Sensor that monitors the Waste
Drawer. If the Motion Sensor identies
movement within the Waste Drawer
while at the Home position, the unit will
rotate the Globe to a position such that
the Waste Po provides egress from the
Waste Drawer.
Distance
Sensor
Drawer Full
Indicator
Upon the rst and second
activation of the DFI, the Light
Bar will flash blue, and the Cat
Sensor(s) remain active.
Upon the third activa tion of
the DFI, the Cat Sensor(s) are
deactivated and the unit will no
longer cycle automatically.
Check or empty the Waste Drawer, then
press Reset to cancel the indicator. Press
Reset again to zero the Weight Scale. Note
that the Weight Scale also automatically
zeroes itself aer each Clean cycle.
Drawer Full Indicator (DFI)
The Lier-Robot is equipped with a Distance Sensor looking downward from the top of the
unit that is used to detect the waste level within the Waste Drawer. During each Clean cycle,
the DFI Sensor will measure the level of waste within the Waste Drawer as the Waste Po
passes over the Waste Drawer.
When the Waste Drawer is full, the Light Bar will flash blue.
Cat Presence
Sensor
To Next Page
Loading...
Need help?
General
