www.whiskersuppo.com
24
Sleep Mode
This mode allows you to deactivate the Cat Sensor(s) for a specied period of time, so the
unit will not cycle automatically. Sleep Mode is useful for units located in bedrooms or areas
where you may not want the unit to cycle for a ceain period of the day.
The unit is programmed with a default 8-hour sleep period. This sleep period is repeated
every 24 hours; the sta is determined by the time the mode is initially set.
A 3-second long press of the Cycle buon will enable Sleep Mode. Sleep Mode is indicated
by the Light Bar turning purple. The Light Bar will remain purple during the sleep period and
then return to blue once the sleep period has expired.
During the sleep period the unit will monitor for a cat using the unit, but will not peorm a
Clean cycle. When the sleep period expires, if no usage of the unit was detected, the unit will
change to Ready Mode, indicated by a blue Light Bar, and operate in Automatic Mode for the
remainder of the 24-hour period.
If the unit detects usage during the sleep period, a Clean cycle will be peormed upon the
sleep period expiring. Once the Globe has returned to the Home position, the Light Bar will
change to blue and the unit will operate in Automatic Mode for the remainder of the 24-hour
period.
A 3-second long press of the Cycle buon will disable Sleep Mode, indicated by the Light
Bar changing to blue from purple, or by the Light Bar flashing purple momentarily if the unit is
not in the sleep period.
Note that the Whisker app (see page 26) oers customisable Sleep Mode programming
options.
Cycle Delay Seing
The Cycle Delay is the elapsed time staing from when your cat exits the Globe until the unit
stas a Clean cycle. It can be set for 3, 7, 15, 25, or 30 minutes. The default Cycle Delay is 7
minutes.
Reduce the Cycle Delay if it is impoant to minimize odour and/or the time that waste is
available to other pets, such as dogs. However, reducing the Cycle Delay may reduce the
cleaning eectiveness if clumps do not have enough time to set up. Extend the Cycle Delay
when using a lower-quality clumping lier that needs more time to set up.
To Next Page
Loading...
Need help?
General
