www.whiskersuppo.com
26
Whisker App
The Whisker app oers customisable programming options for your Lier-Robot from
the convenience of your phone. You can monitor and control your Lier-Robot, receive
notications, get insights into your cat’s health by comparing weekly and monthly stats,
and more.
Installing the Whisker app
1. Press the Power buon to turn the Lier-Robot ON.
2. Download the Whisker app from the App Store or Google Play.
3. Make sure your device's bluetooth is enabled. Scan the QR code
to be directed to your specic app Store.
4. Your Lier-Robot ships with the unit in Onboarding Mode (WiFi
light blinking yellow).
a. If your unit is not in Onboarding Mode, press and hold the Connect buon
for 3 seconds or until the Onboarding light blinks yellow.
5. Follow the prompts in the app and scan the QR code on the back of the unit as
directed.
6. Once the Lier-Robot is successfully connected to WiFi, the Onboarding light on the
Control Panel Light Bar will display a solid blue light.
7. If Onboarding fails, you will be prompted to retry or cancel. If you retry, the process is
staed over.
8. Once you have successfully Onboarded, select your unit on the home screen to view
your Lier-Robot and adjust any seings.
To Next Page
Loading...
Need help?
General
