PS 112713
Page 14 | 1-800-343-9463
LIQUID MEASURING THERMOSTAT
The WhisperKOOL Series cooling units come equipped with a liquid temperature measuring thermostat. This
incorporates the following advantages:
Liquid Measuring Thermostat
To assure a consistent temperature, place bottle probe at least 3 feet away from the air output and not in the flow of the air.
To Use the thermostat:
1. Locate an empty wine bottle.
2. Fill 3/4 full with room temperature tap water.
3. Place bottle probe securely into bottle.
4. Place bottle with probe level and to the side of the unit in your
wine cellar. It is recommended that it is placed in a central location
of your wine cellar. Avoid pulling too much on the probe cord. It
may become disconnected resulting in non-operation of the unit.
Note: The thermostat can be set between 50°F
and 67°F.
Remember: The WhisperKOOL unit operates based on the
temperature of the water. Do not be misled by thermostats reading
air temperature. The air temperature in the cellar will be cooler
than the liquid temperature of the wine while it is coming to
optimum balanced temperature.
To Next Page
Loading...
Need help?
General
