Kunststoffschweißtechnik
WIDOS Einsteinstr. 5 Phone +49 7152 9939 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax +49 7152 9939 - 40
info @ widos.de
http://www.widos.de
30.06.11 Working Instructions WIDOS 5100 Page 31 of 45
8. Transport
The machine can be transported either by means of two transport boxes or by one packing
box.
One transport box is provided for the basic frame, the hydraulic aggregate and the heat
protective box with planer and heating element, the other one contains the reduction inserts.
• The hydraulic hoses at the basic machine should not be unscrewed (air penetration).
⇒
Make sure that they are not being squeezed.
• Handle the machine with care.
⇒
Do not tilt the hydraulic aggregate because oil may come out.
⇒
Protect from heavy shocks and impacts.
⇒
Make sure that the box cover is well closed.
• Care was taken to build the transport boxes according to lightweight construction.
⇒
Be always careful while using automatic handling and carrying machines.
During the transport of the machine there may be cold weldings between the
piston rod and the eyes of the planer shell. These spots on the piston rod may
damage the sealing.
Therefore the eyes must be lubricated with PTFE-spray before transport!
To Next Page
Loading...
