widos SPA 600 - Programming the SPA

Starting and operating Chapter 5
08.05.2019 Working Instructions WIDOS SPA 600 Page 18 of 42
5.6. Programming the SPA
As soon as the mains plug of the SPA 600 is connected to a plug box (mains / hydraulic aggregate), the
display is lightened (the computer is being initialised).
Display:
2. line:
WIDOS GmbH
Germany
after 3 s:
Display:
2. line:
version 0.00.0
sernr 000000
Number of the software version
Serial number of the machine
after 3 s:
Display:
2. line:
000 free weldings
0000 SD card
Number of free memory capacity (RAM)
Number of free memory capacity SD card
after 3 s:
Display:
2. line:
WIDOS 4600 SPA
09:43 03.05.2004
Display of the currently set machine type
Current time and date
alternating with: 21°C HE= - - - °C current
outside and heating element temperature
„Basic menu“
In the basic menu, following possibilities are given:
 The welding process is started by the drag pressure measurement.
 Setting the pipe data and the project number by pressing simultaneously <+> and <>.
 The pipe data can also be read from the pipe data card with the bar code reading pen.
 Setting the machine type and printing the welding data by pressing simultaneously
<> and <Enter>.
 Diagnosis menu by pressing simultaneously <+> and <Enter>.