widos SPA 600 - Setting the Pipe Data for Welding Double Pipes

Starting and operating Chapter 5
08.05.2019 Working Instructions WIDOS SPA 600 Page 30 of 42
Confirm Yes by pressing button <Enter>
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Select machine type
Select machine type by pressing buttons <+> and <->.
Next step by pressing button <Enter>.
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Entering the time
Enter the time by pressing buttons <+> and <->.
Next step by pressing button <Enter>.
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Entering the date
Enter the date by pressing buttons <+> and <->.
Next step by pressing button <Enter>.
5.7.15. Setting the pipe data for welding double pipes
Abort and back to basic menu by pressing button <C>.
One step back by pressing buttons <Enter> (keeping pressed) and <->.
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Basic menu
When pressing simultaneously buttons <+> and <>, the pipe data can be
changed over the keyboard.
Display:
2. line:
mat1 diam wall
PE80 160 14.6
Important! First enter the dimension of the internal
pipe
Select the dimension of the internal pipe by pressing buttons <+>, <> and
<Enter>,
next step by pressing button <Enter>.
Display:
2. line:
mat2 diam wall
PE80 160 14.6
Setting the dimension of the external pipe