widos SPA 600 - Setting the pipe data

Starting and operating Chapter 5
08.05.2019 Working Instructions WIDOS SPA 600 Page 20 of 42
In case ttraceability has been confirmed with „yes“, the display indicates:
Display:
2. line:
Pipe length
No
Select pipe length for traceability
Press button <+> for Yes
Confirm Yes or No by pressing button <Enter>
Display:
2. line:
shortened cooling
no
Select the shortened cooling time
Press button <+> for Yes
Confirm Yes or No by pressing button <Enter>
It is allowed to use the shortened cooling time under the following conditions:
- Welding material: PE and PP
- Prefabrikation under workshop conditions
- Low additional pressure at unclamp
- No additional pressure during further cooling down
- Load onto the workpieces only after being completely cooled down
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Select the machine type
Select the machine type with buttons <+> and <->
Next menu by pressing button <Enter>
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Enter the time
Enter the time with buttons <+> and <->
Next menu by pressing button <Enter>
Display:
2. line:
WIDOS 4400 SPA
09:43 03.05.2004
Enter the date
Enter the date with buttons <+> and <->
Next menu by pressing button <Enter>