A- Time
B- Date
C- Moon Phase
D- Photo Count
Mounting
1. When mounting to a tree, first latch the 2 bungee cords through the mounting holes on the left or right side of the
camera. Then, stretch the cords around the tree and latch the other ends of the bungee cords through the mounting
holes on the opposite side of the camera.
IMPORTANT TIPS:
Recommended distance from target area is 25-30 feet for optimal imaging quality.
To improve the quality of your images, try not to mount the unit facing the rising or the setting sun in order to
avoid direct sunlight into the camera lens.
If mounting to a feeder unit or dusty environment, be sure to clean the camera lens cover, incandescent flash
cover, and the PIR sensor cover on a regular basis.
Periodically check the mounting of the camera to insure it is not loose.
Make sure that you securely latch the door closed each and every time you use the unit, as the moisture seal
will not be activated unless closed properly.
Check batteries frequently to insure no corrosive build-up, as this may cause harm to the camera.
Retrieving Images (SD Card Reader)
To Next Page
Loading...
