English
32 WILO SE 04/2013
4 Intended use
Wilo pressure boosting systems of the SiBoost-
Smart series are designed for pressure boosting
and pressure support in water-supply systems.
They are used in:
• drinking water supply systems, primarily in high-
rise apartments, hospitals, offices and industrial
buildings, the structure, function and require-
ments of which comply with the following stand-
ards, guidelines and directives:
• DIN1988 (for Germany)
• DIN2000 (for Germany)
• EU Directive 98/83/EC
• Drinking Water Ordinance - TrinkwV2001 (for
Germany)
• DVGW directives (for Germany),
• Industrial water supply and cooling systems
• Fire water and supply systems for local use,
• Irrigation and sprinkling installations
Automatically controlled pressure boosting sys-
tems are supplied from the public drinking water
mains either directly (connected directly) or indi-
rectly (connected indirectly) using a break tank.
These break tanks are sealed but are not pressu-
rised, i.e. they are under only atmospheric pres-
sure.
5 Product information
5.1 Type key
Example: Wilo-SiBoost-Smart-2 Helix V605
Wilo Brand name
SiBoost Product family: pressure boosting systems
(system intelligence booster)
Smart Series designation
2 Number of pumps
Helix Series designation of pumps (see enclosed
pump documentation)
V Pump design, vertical standard version
6 Nominal flow rate Q
[m
3
/h] (2-pole version 50 Hz)
05 Number of pump stages
Example: Wilo-SiBoost-Smart FC-3 Helix V1007
Wilo Brand name
SiBoost Product family: pressure boosting systems
(system intelligence booster)
Smart Series designation
FC With built-in frequency converter in the control
device
3 Number of pumps
Helix Series designation of pumps (see
enclosed pump documentation)
V Pump design, vertical standard version
10 Nominal flow rate Q
[m
3
/h] (2-pole version 50 Hz)Number of pump
stages
07 Number of pump stages
Example: Wilo-SiBoost-Smart -4 Helix VE1603
Wilo Brand name
SiBoost Product family: pressure boosting systems
(system intelligence booster)
Smart Series designation
4 Number of pumps
Helix Series designation of pumps (see
enclosed pump documentation)
VE Pump design, vertical electronic version (with
frequency converter)
16 Nominal flow rate Q
[m
3
/h] (2-pole version 50 Hz)
03 Number of pump stages
Example: Wilo-SiBoost-Smart -4 Helix EXCEL1005
Wilo Brand name
SiBoost Product family: pressure boosting systems
(system intelligence booster)
Smart Series designation
4 Number of pumps
Helix Series designation of pumps (see
enclosed pump documentation)
EXCEL Pump design, (high-efficiency motor with fre-
quency converter)
10 Nominal flow rate Q
[m
3
/h] (2-pole version 50 Hz)
05 Number of pump stages
To Next Page
Loading...
