en
Installation and operating instructions • Wilo-Yonos MAXO/-D/-Z • Ed.01/2022-08 11
• The connection must be secured by means of a residual-current
device (RCD).
• The product must be earthed.
• Have defective cables replaced immediately by a qualified electri-
cian.
• Never open the control module and never remove operating ele-
ments.
2.4 Operator responsibilities
Operators must:
• Provide the installation and operating instructions in a language
which the personnel can understand.
• Have all work carried out by qualified personnel only.
• Make sure that personnel are suitably trained for the specified work.
• Train personnel with regard to the operating principles of the sys-
tem.
• Provide the necessary protective equipment and make sure that
personnel wear it.
• Eliminate any risk from electrical current.
• Equip hazardous components (extremely cold, extremely hot, rotat-
ing, etc.) with a guard to be provided by the customer.
• Have defective gaskets and connection cables replaced.
• Keep highly flammable materials at a safe distance from the product.
Follow all information that appears on the product and ensure that it
remains permanently legible:
• Warning and hazard notices
• Rating plate
• Direction of rotation arrow/symbol for direction of flow
• Labelling of connections
This device can be used by children from 8years of age as well as
people with reduced physical, sensory or mental capacities or lack of
To Next Page
Loading...
Need help?
General
