Charge Indicator - The light emitting diode (LED) will light when battery is being charged.
Red LED on indicates full charge current,
Green LED on indicates battery charged, trickle charge current.
Amber LED on indicates that the meter is 75% or more charged and may be used.
The operating time may be reduced to 15hrs continuos use
Flashing red LED indicates LOW battery volts.
Regular Use of Meter
Charge battery overnight once per week
In Storage
Fully charge battery before storage
Charge battery overnight once every three months
NOTE
Long term storage of the ME2100 without battery recharge can lead to a short battery life or even
permanent battery operation impairment.
Wiltronics Research Pty Ltd 16
561 DC1V1
Charging the Battery (continued)
IMPORTANT CAUTION
FULLY CHARGE BATTERY BEFORE STORAGE OF THE METER
It is recommended that your ME2100 and the previous models should be returned annually for
scheduled maintenance and calibration.
A "ME2100/ME2000/ME2000A Moisture Meter - Service Return Form" is available on the resources section of the
"Wiltronics Fine Fuel Moisture Meter ME2100" on the website
www.wiltronics.com.au in the "Tools & Test Equipment" Section or email
info@wiltronics.com.au and request a copy of the form
10. Scheduled Maintenance and Calibration
Recommendations
To Next Page
Loading...